dmesg - Intel Core M-5Y71
Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP BlankOn 4.6.4-1 (2016-07-28)
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000088469fff] usable
BIOS-e820: [mem 0x000000008846a000-0x0000000088d69fff] reserved
BIOS-e820: [mem 0x0000000088d6a000-0x000000009c98efff] usable
BIOS-e820: [mem 0x000000009c98f000-0x000000009ce7efff] reserved
BIOS-e820: [mem 0x000000009ce7f000-0x000000009cf7efff] ACPI NVS
BIOS-e820: [mem 0x000000009cf7f000-0x000000009cffefff] ACPI data
BIOS-e820: [mem 0x000000009cfff000-0x000000009cffffff] usable
BIOS-e820: [mem 0x000000009d000000-0x000000009fffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000025effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: LENOVO 80HE/VIUU4, BIOS A6CN58WW 08/06/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x25f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7C00000000 write-back
1 base 009D000000 mask 7FFF000000 uncachable
2 base 009E000000 mask 7FFE000000 uncachable
3 base 00A0000000 mask 7FE0000000 uncachable
4 base 00C0000000 mask 7FC0000000 uncachable
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: update [mem 0x9d000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x9d000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
BRK [0x01d36000, 0x01d36fff] PGTABLE
BRK [0x01d37000, 0x01d37fff] PGTABLE
BRK [0x01d38000, 0x01d38fff] PGTABLE
BRK [0x01d39000, 0x01d39fff] PGTABLE
BRK [0x01d3a000, 0x01d3afff] PGTABLE
BRK [0x01d3b000, 0x01d3bfff] PGTABLE
RAMDISK: [mem 0x34604000-0x362f9fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
ACPI: XSDT 0x000000009CFC8188 0000D4 (v01 LENOVO CB-01 00000001 01000013)
ACPI: FACP 0x000000009CFF0000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DSDT 0x000000009CFD8000 012B69 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FACS 0x000000009CF7A000 000040
ACPI: UEFI 0x000000009CFFC000 000042 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MSDM 0x000000009CFF5000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASPT 0x000000009CFF3000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DBGP 0x000000009CFF1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: LPIT 0x000000009CFEE000 000094 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: MCFG 0x000000009CFEC000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD3000 00067E (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD2000 000494 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFCB000 005D3D (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFF6000 005FF0 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: BOOT 0x000000009CFF2000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: APIC 0x000000009CFED000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD4000 00342F (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: SSDT 0x000000009CFD1000 000B74 (v02 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: ASF! 0x000000009CFF4000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: WDAT 0x000000009CFEB000 000224 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: UEFI 0x000000009CFFD000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: HPET 0x000000009CFEF000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: DMAR 0x000000009CFCA000 0000CC (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: CSRT 0x000000009CFC9000 0000C4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: FPDT 0x000000009CFC7000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000025effffff]
NODE_DATA(0) allocated [mem 0x25eff8000-0x25effcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000025effffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009dfff]
node 0: [mem 0x0000000000100000-0x0000000088469fff]
node 0: [mem 0x0000000088d6a000-0x000000009c98efff]
node 0: [mem 0x000000009cfff000-0x000000009cffffff]
node 0: [mem 0x0000000100000000-0x000000025effffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000025effffff]
On node 0 totalpages: 2076717
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 9923 pages used for memmap
DMA32 zone: 635024 pages, LIFO batch:31
Normal zone: 22464 pages used for memmap
Normal zone: 1437696 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0x9e000000-0x9fffffff
ACPI: PM-Timer IO Port: 0x1808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x8846a000-0x88d69fff]
PM: Registered nosave memory: [mem 0x9c98f000-0x9ce7efff]
PM: Registered nosave memory: [mem 0x9ce7f000-0x9cf7efff]
PM: Registered nosave memory: [mem 0x9cf7f000-0x9cffefff]
PM: Registered nosave memory: [mem 0x9d000000-0x9fffffff]
PM: Registered nosave memory: [mem 0xa0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
e820: [mem 0xa0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
percpu: Embedded 32 pages/cpu @ffff88025ec00000 s93720 r8192 d29160 u262144
pcpu-alloc: s93720 r8192 d29160 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 2044245
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8065144K/8306868K available (5932K kernel code, 1090K rwdata, 2696K rodata, 1336K init, 824K bss, 241724K reserved, 0K cma-reserved)
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:33024 nr_irqs:760 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 1396.706 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.41 BogoMIPS (lpj=5586824)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160108
ACPI: 7 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: disabled by default; enable with sysctl kernel.yama.*
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Disabling memory control group subsystem
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
ftrace: allocating 24381 entries in 96 pages
smpboot: Max logical packages: 4
smpboot: APIC(0) Converting physical 0 to logical package 0
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed90000 flags: 0x0
DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
DMAR: DRHD base: 0x000000fed91000 flags: 0x1
DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
DMAR: RMRR base: 0x0000009ce26000 end: 0x0000009ce45fff
DMAR: RMRR base: 0x0000009d800000 end: 0x0000009fffffff
DMAR: ANDD device: 1 name: \_SB.PCI0.SDMA
DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed91000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) M-5Y71 CPU @ 1.20GHz (family: 0x6, model: 0x3d, stepping: 0x4)
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (11177.43 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0x9ce7f000-0x9cf7efff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x44 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 17 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802549AFC00 0003D3 (v02 PmRef Cpu0Cst 00003001 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802548F8000 0005AA (v02 PmRef ApIst 00003000 INTL 20121220)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8802560A9E00 000119 (v02 PmRef ApCst 00003000 INTL 20121220)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [PG00] (on)
ACPI: Power Resource [PG01] (on)
ACPI: Power Resource [PG02] (on)
acpi ABCD0000:00: ACPI dock station (docks/bays count: 1)
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xa0000000-0xfeafffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
pci 0000:00:02.0: [8086:161e] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
pci 0000:00:03.0: reg 0x10: [mem 0xc1318000-0xc131bfff 64bit]
pci 0000:00:04.0: [8086:1603] type 00 class 0x118000
pci 0000:00:04.0: reg 0x10: [mem 0xc1310000-0xc1317fff 64bit]
pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xc1300000-0xc130ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc1321000-0xc132101f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc131c000-0xc131ffff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:9c94] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:9cc7] type 00 class 0x060100
pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc1324000-0xc13247ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc1320000-0xc13200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xc1323000-0xc1323fff 64bit]
pci 0000:01:00.0: [14e4:43b1] type 00 class 0x028000
pci 0000:01:00.0: reg 0x10: [mem 0xc1200000-0xc1207fff 64bit]
pci 0000:01:00.0: reg 0x18: [mem 0xc1000000-0xc11fffff 64bit]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:01:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc12fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: Enabled 6 GPEs in block 00 to 7F
ACPI : EC: GPE = 0x34, I/O: command/status = 0x66, data = 0x62
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
e820: reserve RAM buffer [mem 0x8846a000-0x8bffffff]
e820: reserve RAM buffer [mem 0x9c98f000-0x9fffffff]
e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff]
e820: reserve RAM buffer [mem 0x25f000000-0x25fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [io 0x06a4] has been reserved
system 00:00: [io 0x06a0] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x0680-0x069f] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0xffff] has been reserved
system 00:01: [io 0x1800-0x18fe] could not be reserved
system 00:01: [io 0x164e-0x164f] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:03: [io 0x1854-0x1857] has been reserved
system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
system 00:05: [mem 0xfe102000-0xfe102fff] has been reserved
system 00:05: [mem 0xfe104000-0xfe104fff] has been reserved
system 00:05: [mem 0xfe106000-0xfe106fff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xa0010000-0xa001ffff] has been reserved
system 00:06: [mem 0xa0000000-0xa000ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [mem 0xc1000000-0xc12fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff window]
pci_bus 0000:01: resource 1 [mem 0xc1000000-0xc12fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:14.0: can't derive routing for PCI INT A
pci 0000:00:14.0: PCI INT A: no GSI
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 29656K (ffff880034604000 - ffff8800362fa000)
DMAR: ACPI device "INTL9C60:00" under DMAR at fed91000 as 00:15.0
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x9898f000-0x9c98f000] (64MB) mapped at [ffff88009898f000-ffff88009c98efff]
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
simple-framebuffer simple-framebuffer.0: framebuffer at 0xb0000000, 0x300000 bytes, mapped to 0xffffc90001000000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
Console: switching to colour frame buffer device 128x48
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 2048 (order: 5, 131072 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1475938313.376:1): initialized
Initialise system trusted keyring
workingset: timestamp_bits=37 max_order=21 bucket_order=0
zbud: loaded
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x11142120
intel_idle: v0.4.1 model 0x3D
intel_idle: lapic_timer_reliable_states 0xffffffff
GHES: HEST is not enabled!
Linux agpgart interface v0.103
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, 242 bytes nvram, hpet irqs
Intel P-state driver initializing.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
microcode: CPU0 sig=0x306d4, pf=0x80, revision=0x19
microcode: CPU1 sig=0x306d4, pf=0x80, revision=0x19
microcode: CPU2 sig=0x306d4, pf=0x80, revision=0x19
microcode: CPU3 sig=0x306d4, pf=0x80, revision=0x19
microcode: Microcode Update Driver: v2.01 , Peter Oruba
registered taskstats version 1
Loading compiled-in X.509 certificates
alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
zswap: loaded using pool lzo/zbud
rtc_cmos 00:02: setting system clock to 2016-10-08 14:51:53 UTC (1475938313)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
Freeing unused kernel memory: 1400K (ffff8800018a2000 - ffff880001a00000)
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd urandom read with 9 bits of entropy available
button: module verification failed: signature and/or required key missing - tainting kernel
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
hidraw: raw HID events driver (C) Jiri Kosina
wmi: Mapper loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
xhci_hcd 0000:00:14.0: PCI INT A: no GSI
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
SCSI subsystem initialized
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.6.0-1-amd64 xhci-hcd
usb usb1: SerialNumber: 0000:00:14.0
[drm] Initialized drm 1.1.0 20060810
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 11 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.6.0-1-amd64 xhci-hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb: port power management may be unreliable
ahci 0000:00:1f.2: version 3.0
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0xc1324000 port 0xc1324100 irq 44
[drm] Memory usable by graphics device = 4096M
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: switching to inteldrmfb from simple
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
usb 1-4: new full-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: READ LOG DMA EXT failed, trying unqueued
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ATA-9: SAMSUNG MZNTE256HMHP-000L2, EXT26L0Q, max UDMA/133
ata1.00: 500118192 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZNTE256 6L0Q PQ: 0 ANSI: 5
usb 1-4: New USB device found, idVendor=0489, idProduct=e07a
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-4: Product: BCM20702A0
usb 1-4: Manufacturer: Broadcom Corp
usb 1-4: SerialNumber: 1008B1E4D82A
usb 1-7: new high-speed USB device number 3 using xhci_hcd
usb 1-7: New USB device found, idVendor=5986, idProduct=0535
usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
usb 1-7: Product: Lenovo EasyCamera
usb 1-7: Manufacturer: Generic
usb 1-7: SerialNumber: 200901010001
tsc: Refined TSC clocksource calibration: 1396.766 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1422315cd49, max_idle_ns: 440795270477 ns
usb 1-8: new full-speed USB device number 4 using xhci_hcd
usb 1-8: New USB device found, idVendor=048d, idProduct=8386
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-8: Product: ITE Device(8386)
usb 1-8: Manufacturer: ITE Tech. Inc.
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
[drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced-size. Try to increase stolen memory size if available in BIOS.
Console: switching to colour frame buffer device 400x112
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
clocksource: Switched to clocksource tsc
raid6: sse2x1 gen() 8263 MB/s
raid6: sse2x1 xor() 6138 MB/s
raid6: sse2x2 gen() 10131 MB/s
raid6: sse2x2 xor() 6871 MB/s
raid6: sse2x4 gen() 11899 MB/s
raid6: sse2x4 xor() 8331 MB/s
raid6: avx2x1 gen() 15955 MB/s
raid6: avx2x2 gen() 18563 MB/s
raid6: avx2x4 gen() 21024 MB/s
raid6: using algorithm avx2x4 gen() 21024 MB/s
raid6: using avx2x2 recovery algorithm
xor: automatically using best checksumming function:
avx : 25802.000 MB/sec
Btrfs loaded
PM: Starting manual resume from disk
PM: Hibernation image partition 8:5 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 230 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: brltty.service: Cannot add dependency job, ignoring: Unit brltty.service is masked.
systemd[1]: lvm2-lvmpolld.socket: Cannot add dependency job, ignoring: Unit lvm2-lvmpolld.socket is masked.
systemd[1]: lvm2-lvmetad.socket: Cannot add dependency job, ignoring: Unit lvm2-lvmetad.socket is masked.
systemd[1]: lvm2-monitor.service: Cannot add dependency job, ignoring: Unit lvm2-monitor.service is masked.
systemd[1]: dm-event.socket: Cannot add dependency job, ignoring: Unit dm-event.socket is masked.
systemd[1]: live-config.service: Cannot add dependency job, ignoring: Unit live-config.service is masked.
systemd[1]: live-tools.service: Cannot add dependency job, ignoring: Unit live-tools.service is masked.
systemd[1]: Listening on RPCbind Server Activation Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: PNFS blkmaping enablement. is not active.
systemd[1]: Dependency failed for pNFS block layout mapping daemon.
systemd[1]: nfs-blkmap.service: Job nfs-blkmap.service/start failed with result 'dependency'.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Created slice System Slice.
systemd[1]: Mounting RPC Pipe File System...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Starting Journal Service...
systemd[1]: Mounting NFSD configuration filesystem...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Created slice User and Session Slice.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Reached target Slices.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Reached target User and Group Name Lookups.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
EXT4-fs (sda1): re-mounted. Opts: (null)
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Load/Save Random Seed...
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounted RPC Pipe File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Load/Save Random Seed.
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
systemd[1]: Mounted NFSD configuration filesystem.
systemd[1]: Started Journal Service.
systemd-journald[1105]: Received request to flush runtime journal from PID 1
ACPI: AC Adapter [ADP1] (off-line)
random: nonblocking pool is initialized
input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input5
ACPI: Battery Slot [BAT1] (battery present)
dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
ACPI Error: [\_SB_.PCI0.LPCB.H_EC.PMAX] Namespace lookup failure, AE_NOT_FOUND (20160108/psargs-359)
ACPI Error: Method parse/execution failed [\_SB.PCI0.B0D4._TMP] (Node ffff8802560fa1b8), AE_NOT_FOUND (20160108/psparse-542)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
media: Linux media interface: v0.10
Linux video capture interface: v2.00
sd 0:0:0:0: Attached scsi generic sg0 type 0
uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (5986:0535)
uvcvideo 1-7:1.0: Entity type for entity Realtek Extended Controls Unit was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input6
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC286: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC1D0: inputs:
snd_hda_codec_realtek hdaudioC1D0: Mic=0x18
snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x12
Bluetooth: Core ver 2.21
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
input: PC Speaker as /devices/platform/pcspkr/input/input11
usbcore: registered new interface driver btusb
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
Bluetooth: hci0: BCM: chip id 63
wlan0: Broadcom BCM43b1 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0489-e07a.hcd (-2)
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0489-e07a.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0489-e07a.hcd not found
Adding 8305660k swap on /dev/sda5. Priority:-1 extents:1 across:8305660k SSFS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
intel_rapl: RAPL package 0 domain package locked by BIOS
intel_rapl: RAPL package 0 domain dram locked by BIOS
hid-rmi 0018:06CB:2714.0002: Scanning PDT...
hid-rmi 0018:06CB:2714.0002: Found F34 on page 0x00
hid-rmi 0018:06CB:2714.0002: Found F01 on page 0x00
input: ATML1000:00 03EB:8A10 as /devices/pci0000:00/INT3433:00/i2c-6/i2c-ATML1000:00/0018:03EB:8A10.0003/input/input15
hid-rmi 0018:06CB:2714.0002: Found F11 on page 0x00
hid-multitouch 0018:03EB:8A10.0003: input,hidraw0: I2C HID v1.00 Device [ATML1000:00 03EB:8A10] on i2c-ATML1000:00
hid-rmi 0018:06CB:2714.0002: Found F54 on page 0x01
hid-rmi 0018:06CB:2714.0002: Found F55 on page 0x02
hid-rmi 0018:06CB:2714.0002: Found F30 on page 0x03
hid-rmi 0018:06CB:2714.0002: rmi_scan_pdt: Done with PDT scan.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
hid-rmi 0018:06CB:2714.0002: rmi_populate_f11: size in mm: 87 x 57
hid-rmi 0018:06CB:2714.0002: firmware id: 0
input: SYNA2B22:00 06CB:2714 as /devices/pci0000:00/INT3432:00/i2c-5/i2c-SYNA2B22:00/0018:06CB:2714.0002/input/input14
hid-rmi 0018:06CB:2714.0002: input,hidraw1: I2C HID v1.00 Mouse [SYNA2B22:00 06CB:2714] on i2c-SYNA2B22:00
wl 0000:01:00.0 wlp1s0: renamed from wlan0
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
vboxdrv: Found 4 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 1396766054 Hz
vboxdrv: Successfully loaded version 5.1.4 (interface 0x00260000)
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period (net ffffffff81ad5280)
fuse init (API version 7.24)
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
perf: interrupt took too long (2569 > 2500), lowering kernel.perf_event_max_sample_rate to 77750
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
perf: interrupt took too long (3225 > 3211), lowering kernel.perf_event_max_sample_rate to 62000
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
perf: interrupt took too long (4142 > 4031), lowering kernel.perf_event_max_sample_rate to 48250
usb 1-2: new high-speed USB device number 5 using xhci_hcd
usb 1-2: New USB device found, idVendor=1737, idProduct=0077
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: 802.11 g WLAN
usb 1-2: Manufacturer: Ralink
usb 1-2: SerialNumber: 1.0
usb 1-2: reset high-speed USB device number 5 using xhci_hcd
ieee80211 phy1: rt2x00_set_rt: Info - RT chipset 3070, rev 0201 detected
ieee80211 phy1: rt2x00_set_rf: Info - RF chipset 0006 detected
ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
usbcore: registered new interface driver rt2800usb
rt2800usb 1-2:1.0 wlx687f7468daa6: renamed from wlan0
IPv6: ADDRCONF(NETDEV_UP): wlx687f7468daa6: link is not ready
ieee80211 phy1: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin'
rt2800usb 1-2:1.0: firmware: direct-loading firmware rt2870.bin
ieee80211 phy1: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.29
IPv6: ADDRCONF(NETDEV_UP): wlx687f7468daa6: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlx687f7468daa6: link is not ready
wlx687f7468daa6: authenticate with 60:18:88:d8:8a:8c
wlx687f7468daa6: send auth to 60:18:88:d8:8a:8c (try 1/3)
wlx687f7468daa6: authenticated
wlx687f7468daa6: associate with 60:18:88:d8:8a:8c (try 1/3)
wlx687f7468daa6: RX AssocResp from 60:18:88:d8:8a:8c (capab=0x1411 status=0 aid=6)
wlx687f7468daa6: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlx687f7468daa6: link becomes ready
alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
wlx687f7468daa6: Limiting TX power to 30 (30 - 0) dBm as advertised by 60:18:88:d8:8a:8c
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
perf: interrupt took too long (5273 > 5177), lowering kernel.perf_event_max_sample_rate to 37750
perf: interrupt took too long (6611 > 6591), lowering kernel.perf_event_max_sample_rate to 30250
usb 1-2: USB disconnect, device number 5
wlx687f7468daa6: deauthenticating from 60:18:88:d8:8a:8c by local choice (Reason: 3=DEAUTH_LEAVING)
atkbd serio0: Unknown key pressed (translated set 2, code 0xbf on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03f ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0xbf on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e03f ' to make it known.
ideapad_laptop: Unknown event: 1
PM: Syncing filesystems ... done.
PM: Preparing system for sleep (mem)
Freezing user space processes ... (elapsed 0.244 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Suspending system (mem)
Suspending console(s) (use no_console_suspend to debug)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
sd 0:0:0:0: [sda] Stopping disk
ERROR @wl_notify_scan_status : wlp1s0 Scan_results error (-22)
PM: suspend of devices complete after 350.955 msecs
PM: late suspend of devices complete after 20.352 msecs
xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 15.876 msecs
ACPI: Preparing to enter system sleep state S3
ACPI : EC: EC stopped
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
Broke affinity for irq 44
Cannot set affinity for irq 53
smpboot: CPU 1 is now offline
Broke affinity for irq 18
Broke affinity for irq 43
Broke affinity for irq 44
smpboot: CPU 2 is now offline
Broke affinity for irq 1
Broke affinity for irq 6
Broke affinity for irq 7
Broke affinity for irq 8
Broke affinity for irq 9
Broke affinity for irq 18
Broke affinity for irq 26
Broke affinity for irq 27
Broke affinity for irq 42
Broke affinity for irq 43
Broke affinity for irq 44
Broke affinity for irq 45
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
ACPI : EC: EC started
PM: Restoring platform NVS memory
Enabling non-boot CPUs ...
x86: Booting SMP configuration:
smpboot: Booting Node 0 Processor 1 APIC 0x2
cache: parent cpu1 should not be sleeping
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
cache: parent cpu2 should not be sleeping
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x3
cache: parent cpu3 should not be sleeping
CPU3 is up
ACPI: Waking up from system sleep state S3
ideapad_laptop: Unknown event: 1
xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 16.180 msecs
PM: early resume of devices complete after 47.918 msecs
rtc_cmos 00:02: System wakeup disabled by ACPI
sd 0:0:0:0: [sda] Starting disk
xhci_hcd 0000:00:14.0: port 7 resume PLC timeout
xhci_hcd 0000:00:14.0: port 3 resume PLC timeout
usb 1-7: reset high-speed USB device number 3 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: ACPI cmd ef/10:09:00:00:00:b0 (SET FEATURES) succeeded
ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
ata1.00: configured for UDMA/133
usb 1-4: reset full-speed USB device number 2 using xhci_hcd
usb 1-8: reset full-speed USB device number 4 using xhci_hcd
PM: resume of devices complete after 4583.898 msecs
usb 1-4:1.0: rebind failed: -517
usb 1-4:1.1: rebind failed: -517
PM: Finishing wakeup.
Restarting tasks ...
pci_bus 0000:01: Allocating resources
pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
pcieport 0000:00:1c.0: BAR 15: assigned [mem 0xa0100000-0xa02fffff 64bit pref]
pcieport 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci_bus 0000:01: Allocating resources
done.
IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
Bluetooth: hci0: BCM: chip id 63
Bluetooth: hci0: BCM20702A
Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000
bluetooth hci0: firmware: failed to load brcm/BCM20702A1-0489-e07a.hcd (-2)
bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0489-e07a.hcd failed with error -2
Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0489-e07a.hcd not found
gnome-software[3054]: segfault at 7f2200297328 ip 00007f224ca46ac5 sp 00007ffc419f4978 error 6 in libglib-2.0.so.0.4800.1[7f224c9b8000+10f000]
ideapad_laptop: Unknown event: 1
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
perf: interrupt took too long (8378 > 8263), lowering kernel.perf_event_max_sample_rate to 23750
ideapad_laptop: Unknown event: 1
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A
[drm:intel_pipe_update_start [i915]] *ERROR* Potential atomic update failure on pipe A